ThermoforminG
Thermoforming: Machines and accessories
Machines
Accessories
Product list machines and accessories with details
FAQ (frequently asked questions)
Accessories
Product list machines and accessories with details
FAQ (frequently asked questions)
Machines
Erkodent produces reliable units working with vacuum technique or with compressed air technique.
High-quality thermoforming results you can realize with both, vacuum and compressed air technique.
If you wish to perform thermoforming and imprinting the opposing bite in one go, we recommend to order a combination of vacuum unit Erkoform-3d or -3 and the integrable occludator Occluform-3.
Erkodent produces reliable units working with vacuum technique or with compressed air technique.
High-quality thermoforming results you can realize with both, vacuum and compressed air technique.
If you wish to perform thermoforming and imprinting the opposing bite in one go, we recommend to order a combination of vacuum unit Erkoform-3d or -3 and the integrable occludator Occluform-3.
Erkoform-3d
Vacuum thermoforming unit with reserve vacuum and touchpanel.
Vacuum thermoforming unit with reserve vacuum and touchpanel.
- No compressed air supply required - plug and play.
- Touchless temperature sensor for accurate determination of the actual thermoforming material temperature.
- No preheating time.
- Sudden vacuum, built up before thermoforming process
(pat. 19511064). - More space for higher models.
- Perpendicular prestretching and forming produces results of even foil thicknesses.
- Completely accessible model during the heating process.
- Practical one-hand foil fixation for foil thicknesses ranging
from 0 to 5 mm. - more info ...
- flash-presentation ...
3d touchpanel
- The program contains all Erkodent thermoforming materials, has a display conducted operating and signalizes necessary working steps.
- Select type and thickness of foil and start.
- The thermoforming temperature and cooling time shown can be changed for special applications without influencing the basic program.
- The display informs about each operating status and the remaining time.
- Safety switch-off after 10 sec., when the next working steps are not executed.
- New foils can be programmed.
Erkoform-3
Vacuum thermoforming unit with reserve vacuum and reduced
electronics.
.... and the instructions (pdf).
Vacuum thermoforming unit with reserve vacuum and reduced
electronics.
- No compressed air supply required - plug and play.
- Touchless temperature sensorfor accurate determination of the actual thermoforming material temperature.
- No preheating time.
- Sudden vacuum, built up before thermoforming process
(pat. 19511064). - All Erkodent foils can be thermoformed.
- The foil temperature is continuously indicated, as soon as the thermoforming temperature is reached, thermoform.
.... and the instructions (pdf).
Occluform-3
Occludator capable of being integrated in the Erkoform-3d and Erkoform-3 units for imprinting the opposing bite (pat. 19915567).
Occludator capable of being integrated in the Erkoform-3d and Erkoform-3 units for imprinting the opposing bite (pat. 19915567).
- The Occluform-3 can only be installed at Erkoform-3d/3 units.
- The opposing bite is imprinted directly in the Erkoform-3d/3 during the thermoforming process!
- Metal construction with hydraulic fixation.
- Ready for self-installation.
- With detailed installation and working instructions.
Occludating bow with fixation ring for Erkoform-3d/3 units.
Model pot for fixation of the model in the Erkoform-3d/3 form pot, granules shovel, hexagonal socket wrench size 3.
Weight 1.2 kg
Model pot for fixation of the model in the Erkoform-3d/3 form pot, granules shovel, hexagonal socket wrench size 3.
Weight 1.2 kg
- Plaster free model fixation.
- Hydraulic fixation of the opposing bite.
- More space for higher models.
- Single column construction for best model accessibility.
- The construction of the Occluform-3 device is based on a Bonwill triangle with a side length of 11.5 cm and a Balkwill angle of 20°.
Erkopress 300 TP
Pressure forming unit for all applications in the dental thermoforming technique.
Pressure forming unit for all applications in the dental thermoforming technique.
- Touchless temperature sensor for accurate determination of the
actual thermoforming material temperature.
- No preheating time.
- Vertical forming without delay for even foil thicknesses.
- Completely accessible model during the heating process.
- High operating safety by automatic switch-off.
- Program-controlled function and running.
Erkopress 300 TP-ci
The mode of operation and running is identical to the Erkopress 300 Tp.
The 300 Tp-ci is additionally equipped with an integrated powerful compressor with reserve compressed-air. With it the unit is independant of a compressed-air system that would possibly have to be installed (pat. 19518211).
More info...
The mode of operation and running is identical to the Erkopress 300 Tp.
The 300 Tp-ci is additionally equipped with an integrated powerful compressor with reserve compressed-air. With it the unit is independant of a compressed-air system that would possibly have to be installed (pat. 19518211).
More info...
.
.and here the complete list of our accessories with details ...
Illustrations and technical details are non-binding.
Changes with the aim of development are reserved.
Changes with the aim of development are reserved.